Avigilon View - Manual (Page 92)

3. Perform one of the following actions:
l
If Network Time Protocol is available:
l
Choose Use Network Protocol to determine time to synchronize the analytic appliance.
l
Check the Obtain NTP server address via DHCP box or manually enter the NTP server.
l
If Network Time Protocol is not available:
l
Choose Set Date and Time manually.
l
Specify the current date and time.
4. Click OK.
NOTE: Analytic appliances and cameras do not contain a battery backup for a real-time clock. It is
recommended that you set the analytic appliance to get its time through an NTP server when possible, which
allows it to always have accurate time.
Configuring Analytics
1. Right-click a camera in the camera tree and select Device Settings...
2. In the Configure Device window, click Analytics.
92 Configuring Analytics