Avigilon View - Manual (Page 60)

6. Click OK.
Deleting a Region of Disinterest
1. Select the ROD shape inside the ROI area.
2. Click Delete ROD.
Adding a Beam
Beams, or IQBeams, are virtual lines used to detect when an object crosses the line. For a Beam to work
properly, the object must be clearly visible before, during, and after it crosses the Beam.
NOTE: When you need to detect movement at the edge of a field of view, you should create an ROI instead of a
Beam.
1. Create a rule involving a Beam as described in Creating a New Rule on page 54.
2. Click New IQBeam.
3. Create an Object crosses an IQBeam rule.
4. Set the direction that a moving object crossing the Beam will generate an alarm:
l
Click Reverse to change the direction.
l
Check the Bi-directional box to trigger the alarm if the Beam is crossed in either direction.
60 Adding a Beam