Avigilon View - Manual (Page 90)

Configuring Settings for a Rialto™ Analytic Appliance
Accessing Common R-Series Settings
You can access storage, date and time, and firmware settings used by the cameras attached to an analytic
appliance.
NOTE: You must set the date and time through Common R-Series Settings. To set the date and time, complete
the steps in Setting the Date and Time on the facing page.
1. Right-click a camera in the camera tree and select Device Settings...
2. Click Open Common R-Series Settings.
3. You can change the amount of storage space, set the date and time, and view firmware versions or
upgrade firmware for all cameras attached to the analytic appliance.
4. To go to the Configure Device window for a particular camera, select it from the list in the Devices pane.
90 Configuring Settings for a Rialto™ Analytic Appliance