APC SMARTSLOT DP300E - Manual (Page 11)

5
Product Description continued
To UPS port The “ To UPS” port is for connecting the Silcon Triple Chas-
sis unit to the UPS , using the Silcon UPS cable. The cable
connector plugs into a communications port on a Silcon
DP300E series UPS .
LED:
Table 1
The Silcon Triple Chassis LED provides important informa-
tion concerning operation of the unit. Refer to the table
below for a description of the conditions indicated by the
LED .
Optional Power
input
With the Optional Power input, you can power either model
of the Silcon Triple Chassis from an external source, using a
24 VDC power adapter. A universal adapter (AP9505i ) is
supplied with AP9604SR . Both models of adapter, AP9505
and AP9505 i, can be purchased separately from APC .
IF the LED is… THEN the Silcon Triple Chassis…
off is not receiving power.
flashing quickly
(5 times per second)
has not been configured. See “Configuring
via the Monitoring Port” on page 10.
blinking slowly
(1 time per second)
is powered on but is not communicating
with the UPS.
on is operating normally.
Table 1: LED