Mounting the chassis in a netshelter enclosure 7, Continued, Mounting the silcon triple chassis – APC SMARTSLOT DP300E User Manual
Page 13
7
Mounting the Silcon Triple Chassis
To mount the Silcon Triple Chassis in a NetShelter enclo-
sure or other 19" rack:
1 Remove the rubber feet from the bottom of the Tri-
ple Chassis.
2 Fasten each rack-mount bracket (supplied) to the
chassis as shown, using two flat head mounting
screws (supplied) and a #2 Phillips screwdriver.
Note: You can attach the mounting brackets at
various hole positions along the side of the
Triple Chassis. Choose a position that will
not cause the unit or cables to interfere with
closing the door of the enclosure or to oth-
erwise protrude from the cabinet. If more
than two mounting holes are aligned, use
the pairs that are the farthest apart.
Figure 4:Mounting the chassis in a NetShelter enclosure
Continued on next page