Unit number (default 001), Default values throughout the emo-500, Ratio programming – AW Gear Meters EMO-500 User Manual
Page 31: Limit programming, Meters/units programming, Global variables, Emo-500
EMO-500
Operation and Programming Manual
30
12. Unit Number (Default 001)
This variable is used for Serial Communication with a host computer. It identifies each EMO-500 unit if
there is more than one on the communication line. Unit #1 is 01, unit #2 is 02, etc.
Default Values Throughout the EMO-500
Ratio Programming
Ideal Ratio = 1.00
Ratio Warning = 5%
Ratio Alarm = 10%
Limit Programming
Limit Rule 3 = Job Total A, value = 3000
Limit Rule 4 = Job Total A, value = 4000
Meters/Units Programming
Meter = Hz
Units = IMPULSES
Global Variables
KFR for A = 100.0
KFT for A = 10000
KFR for B = 100.0
KFT for B = 10000
Units Rate = 12
Units Total = 08
Sample Size = 200
Gate Time = 1.85
Analog Offset = 0000
Analog Gain = 10200
Analog Rule = 06
Unit Number = 01