Catskill Craftsmen 1481 - Manual (Page 10)

Front Assembly
STEP 7
1 Front Left/Back Right Leg, 1 Left
Door,
1 Right Door, 1 Front Right/Back Left
Leg, 2 Front/Back Braces, 1 Cutting
Board Glide Support
Attach the Doors to the
Front/Back Braces using 1 1/2” Steel
Pins making sure to put washers on
the pins on the bottom of the door.
Then attach the braces to the
legs using the bastion posts and set
screws.
Then attach the Cutting Board
Glide Support to the legs using 1 1/4” #8
screws making sure the holes on the edge
face the bottom.
Now attach the magnets to the
bottom edge of the Cutting Board
Glide Support with 7/16” #6 Pan Head
Screws (Bronze).
Washer
7/16” #6 Pan
Head Screw
(Bronze)
FRL FLL
B1
B1
RD LD
FRL FLL
B1
B1
RD LD
B1
B1
RD LD
FLL FRL
GS
Barrel nut & set screw
Inside View
Make sure that the holes on the edge
are facing the bottom of the cart