Catskill Craftsmen 1481 - Manual (Page 7)

Slide Out Cutting Board Assembly
STEP 3
1 Pull Out Cutting Board Top, 1 Cutting Board front, 2 Cutting Board Sides.
Lay Pull Out Cutting Board Top on its back so holes face up. Then attach the Cutting
Board Front to the top, with best side facing out, so that the counter sunk holes face up, using
2 1/2” #8 screws. Now attach the Cutting Board Side Rails to the top so that the glide holes
face out and the countersunk holes face up, using 1 3/4” #8 screws.
Slide Out Cutting Board Assembly Part 2
STEP 4
2 Slide Out Cutting Boards
Attach Glide Inserts to the sides of the Slide Out Cutting Boards and attach handles to
the front of the board using HDL-M5-25 screws.
7/16” #6 Pan Head Screws
2 1/2” #8 Screws
1 3/4” #8 Screws
glide holes towards
the outside
CBF
CBR CBT CBR