Catskill Craftsmen 1481 - Manual (Page 9)

Back Assembly
STEP 6
1 Front Left/Back Right Leg, 1 Back
Panel, 1 Front Right/Back Left Leg, 2
Front/Back Braces, 1 Cutting Board
Glide Support
Attach the Back Panel to the
Front/Back Braces using 3/4” Steel
Pins.
Then attach the braces to the
legs using the bastion posts and set
screws.
Then attach the Cutting Board Glide
Support to the legs using 1 1/4” #8 screws
making sure the holes on the edge face
the bottom.
1 1/4” # 8 Screw
Make sure that the holes on the edge
are facing the bottom of the cart
BLL BRL BP
B1
B1
BLL BRL BP
B1
B1
BP
B1
B1
BP
B1
B1
BRL BLL
GS
Barrel nut & set screw
Inside View