Step 6 – Catskill Craftsmen 7237 User Manual
Page 10
Advertising
Attach the top to the rack base with four 2” #8 screws. This is accomplished by inserting the screws
up through the table top sticks that were attached to the Rack sides in step 4. Some people will find it
easier to attach the top with the unit upright. Another option is to turn the rack top upside down on a
smooth flat surface with the 4 pilot holes up – invert the assembled base, align the holes in the table
top sticks with the 4 pilot holes in the botom of the top ad secure with 2” screws.
TIP: Start all 3 screws into the pilot holes before tightening them down!
STEP 6
ATTACH RACK TOP
Advertising