Catskill Craftsmen 7237 - Manual (Page 5)

STEP 2
SIDE ASSEMBLY PART II
Attach Table Top Sticks to the top inside of each Side with 1 1/4” #8 screws. See illustration 2.
Make sure the countersunk (reamed out) holes on the long narrow edge face downward & that the
small pilot holes on the inside face of the stick face out. These holes on the face are used to attach
Drawer Glides. Attach Bottom Side Cleats with 1 1/4” #8 screws as in illustration 2.
ILLUSTRATION 2
1 1/4” #8 Screws
Table Top Stick
Bottom Side Cleat