Catskill Craftsmen 61531 - Manual (Page 4)

STEP 1
A. Tap/insert ONE 1 1/2” pin
into each end of both doors.
DON”T OVERDRIVE PINS!
pins should stick up about
1/2” when seated.
B. Attach the magnet plates
(may be stuck to magnet!)
with the small flat head screw
to the top of the right door.
Bumps toward wood.
C. Attach door handles with
four 1” truss head machine
screws.
1 1/2” Long 3/16” DIA. Steel Pin (4)
4 used in
this step
Magnet Plate (2)
1” Truss Head Machine Screw (6)
4 used
in this step
1/2” Phillips Flat Head #4 Screw (2)
2 used in this step
ILLUSTRATION 1
STEP 2
3/4” Long 3/16” DIA. Steel Pin (4)
4 used in this step
Take the 2 front braces and tap/insert one 3/4” steel pin
into each end of both braces until seated. About 3/8”
will stick out when seated. Ok if loose.
ILLUSTRATION 2
Truss Head Machine Screw
1/2” #4 Screw
1 1/2” Steel Pin