DeFelsko PosiTector 6000 v.6.2 for Basic (1) and Standard (2) models - Manual (Page 15)

15
T T roubleshooting roubleshooting
Some common reports received by our Service
Department along with possible causes are located
on our website. Most conditions however can be
cleared with a
Reset (pg.11).
T T echnical Dat echnical Dat a a
Gage body dimensions:
5.75" x 2.5" x 1.2" (146 x 64 x 31 mm)
Battery Life: 50 hours continuous / 36,000 readings.
Changing The Batteries Changing The Batteries
The battery icon displays four bars with fresh
alkaline batteries installed. As the batteries weaken,
the number of bars will be reduced. When the
batteries become very weak the Power
Warning image will display and the Gage will
automatically power-down. To maintain user settings
and stored measurements, the batteries must be
replaced.
USE ONLY “AAA” ALKALINE BATTERIES
This image appears if the memory of the
gage has become corrupt. This can occur in
the event that the gage batteries were removed
while the instrument was powered-on and the gage
was not able to self power-down. If this message
appears it will be followed by a full reset. All readings
in memory will be erased and gage settings will be
reset to "out-of-the-box" settings.
To retain all user settings and stored
memory readings, only replace the batteries after the
Gage has automatically powered-down.
-Nickel-cadmium and nickel-metal hydride recharge-
able batteries will work but the Gage may appear to
have weak batteries.
NOTES: