DeFelsko PosiTector 6000 v.6.2 for Basic (1) and Standard (2) models - Manual (Page 4)

4
Menu Operation Menu Operation
Calibration, Calibration, V V erification erification
and and Adjustment Adjustment
Three steps ensure best accuracy…
1.Calibration - typically done by the manufacturer
or a qualified lab
2.Verification of Accuracy - as done by the user
3.Adjustment - to a known thickness
Calibration
Calibration is the controlled and documented
process of measuring traceable calibration
standards and verifying that the results are within the
stated accuracy of the Gage. Calibrations are
typically performed by the Gage manufacturer or by
a certified calibration laboratory in a controlled
environment using a documented process.
Current selection is dispayed
with darkened background
Some buttons have a tick box
to their right to indicate current
status. An empty box indicates
that feature is not active.
Gage functions are menu controlled. To access the
Menu, turn the Gage on, then press the button.
To navigate, press (-) to scroll
DOWN, (+) to scroll
UP and to SELECT. Press both (-)(+) buttons at
any time to exit any menu or select
Exit from the
Menu.
Memory and Statistics on
Standard (2) models only
*
* *