Delmhorst Instrument Navigator User Manual
Page 11
Copyright
2007, Delmhorst Instrument Co.
Page 11 of 28
Settings stored in each particular mode will not be affected by restoring defaults in a
different mode.
JOB DEFINITION:
Using Navigator in ENHANCED mode allows you to define up to 5 jobs, and select locations and
materials being tested for each location. In this mode, Navigator also stores each reading and
allows you to download the data to a PC or laptop via Infrared connection.
TO CREATE OR MODIFY A JOB IN PIN MODE:
1. From the Enhanced Main Menu, use the
п р keys to highlight JOB DEF.
2. Select a job number (from 1 to 5), using the
п р keys.
3. Press the
ò key and highlight DONE. Press SELECT.
If the job was previously defined and used, you will be asked if you want to “Update” the
job.
4
.
Select YES if you want new measurements stored under the same job number.
If it is a new job, the next screen will allow you to completely define the job.
To define a job means to choose between residential or commercial, allocate a 3 digit job ID
number, specify the temperature at which measurements will be taken, select from a list of each
of the rooms in which measurements will be taken, and select the materials used for each
location.
TO CHOOSE BETWEEN RESIDENTIAL AND COMMERCIAL:
Highlight the word COMMERCIAL and press the SELECT key. The following screen will appear: