Avaya R3.0 - Manual (Page 15)

Replacing the hard drive
Issue 6 August 2005 15
Figure 1: Captive screws on cover
2. Slide the server cover back from the front panel until the cover’s tabs are released from the
top slot of the front panel.
3. Lift the cover straight up and remove it from the server.
!
CAUTION:
CAUTION :
For proper cooling and air flow, place the cover back on the server before turning
the power on. Operating the server for extended periods of time (over 30
minutes) with the cover removed might damage server components.
h3mscaps LAO 070103
dis c
1 Captive
Screws