GW Instek GSP-730 User Manual - Manual (Page 91)

REMOTE CONTROL
89
Parameter <freq> Span frequency range
Return parameter <freq> Returns the span and unit
Example meas:span 10 mhz
Sets the span to 10MHz
Query Example meas:span?
> 10000.0 kHz
meas:span:full
Set
Description Sets the span to the full span.
Syntax meas:span:full
Amplitude Commands
meas:refl:unit ............................................................................ 89
meas:refl .................................................................................... 89
meas:refl:unit
Set
Query
Description Sets the reference level unit.
Syntax meas:refl:unit {1|2|3}
Query Syntax meas:refl:unit?
Parameter/
Return parameter 1 dBm
2 dBmV
3 dBuV
Query Example Meas:refl:unit?
>1
The reference level units are dBm.
meas:refl
Set
Query
Description Sets or queries the reference level.