GW Instek GSP-730 User Manual - Manual (Page 94)

GSP-730 User Manual
92
Return parameter <freq> Returns the frequency and unit of the
selected marker.
Example meas:mark:norm:freq 1?
>1.5GHz.
meas:mark:norm:level?
Set
Query
Description Queries the amplitude of the selected normal
marker.
Query syntax meas:mark:norm:level <NR1>?
Parameter <NR1> Marker number 1~ 5.
Return parameter <amp> Returns the amplitude and unit of the
selected marker.
Example meas:mark:norm:level 1?
>10.0dBm.
meas:mark:delta
Set
Description Sets the selected marker to delta mode. It also sets
the relative frequency of the delta marker (in
relation to the normal marker frequency).
Syntax meas:mark:delta <NR1> <freq>
Parameter <NR1> Marker number 1~ 5.
<freq> Relative frequency of the delta marker.
Example meas:mark:freq 1 10 MHz
Turns delta marker 1 on and sets its offset to 10MHz.
meas:mark:delta:freq?
Set
Query
Description Queries the (relative) frequency of the selected
delta marker.
Query syntax meas:mark:delta:freq <NR1>?