GW Instek APS-1102 Control Software User Manual - Manual (Page 110)

APS-1102 Control Software User Manual
10-4
10.2 Sequence Preview
10.2.1 Selecting display area
Select from the combo box which connected device is to be displayed in the Sequence View
window. Up to five sequence graphs can be displayed the sequence display area.
Select the connected
device.
Figure 10-2 Select Display Area
If [None] is selected for the connected device, the sequence graph will not be displayed.
10.2.2 Display settings
For each display area, set the contents to be displayed and the vertical axis scale. The settings of
these parameters will be accepted only in [Edit mode].
Select the object display area.
Select the parameter to be displayed.
Select the vertical axis scale.
Figure 10-3 Selecting Display Area