GW Instek APS-1102 Control Software User Manual - Manual (Page 30)

APS-1102 Control Software User Manual
4-6
4.5.2 Oscillator settings
Set each output setting item.
Input a numerical value or select an item from the list and click the [SET] button. The item is then
set to the device.
Figure 4-7 Oscillator Settings (AC-INT mode)
For a numerical setting input item, the setting range appears when the mouse pointer is moved to the
input area.
Figure 4-8 Setting Range Display Example
The items that cannot be set in the current mode are disabled and cannot be changed. The setting
values for the disabled items do not reflect the settings on the device.
See the device manual for the items that can be set in each mode.
4.5.3 Miscellaneous settings
Make the settings, such as limiter values other than output setting items, or the upper or lower limit
of the range.
As with “oscillator settings”, input a numerical value or select an item from the list and click the
[SET] button. The item is then set to the device.
Figure 4-9 Miscellaneous Settings