8 print – GW Instek APS-1102 Control Software User Manual User Manual
Page 89
8.5 Transferring the Waveform and Settings
8-25
8.5.8 Print
The setting conditions for the system setting screen can also be printed out.
Select [System Setup File(F)] - [Print(P)] (
Alt
,
F
,
P
or
Ctrl
+
P
) to display the screen titled
[ARB - Print].
Make settings for the upper, lower and left margins, the printer or font as needed and click the OK
button.
The parameters set on the system screen and initialized when ARB is started are shown in “Table
8-7 Initialized Values”.
Table 8-7 Initialized Values
APS-1102
Waveform memory name
(No specification)
Waveform memory number
1
Channel
Output on/off
OFF
Frequency [Hz]
50
Cycle [sec]
20 m
Output range
100 V
Amplitude [Vp-p]
0.0
DC offset [V]
0.0
X axis unit
Address
X axis name
(No specification)
X axis minimum value
0.000000
X axis maximum value
1.000000
Y axis unit
Data
Y axis name
(No specification)
Y axis minimum value
1.000
Y axis maximum value
1.000