GW Instek APS-1102 Control Software User Manual - Manual (Page 25)

APS-1102A Control Software User Manual
12
3.5 Common Display Section
The common display section is shown commonly to all functions.
3.5.1 Operation Bar
The Operation Bar has the output ON/OFF switching button and other buttons for various function
operations.
Figure 3-5 Operation Bar
3.5.2 Status Monitor
The status monitor indicates the status of the currently connected APS power source.
Figure 3-6 Status monitor
3.5.3 Status Bar
The status bar indicates the states of the APS power source connection and the software.
Figure 3-7 Status Bar
 Connected Model
Shows the model name of the APS power source set in the System Settings.
 Connection Type
Shows the connection mode with the APS power source set in the System Settings.
 Edit Mode/Control Mode
Shows the execution mode for the sequence ( 5.4.7).
 Elapsed Time
Shows the time elapsed after the sequence was started.