Open or close the measurements logging window, Open the measurements logging window, Close the measurements logging window – GW Instek APS-1102 Control Software User Manual User Manual
Page 50: Name of each component in the window, Figure 6-1 measurements logging window, Open or close the measurements logging, Window, 1 open or close the measurements logging window, 2 name of each component in the window
Advertising
6 Measurements Logging
37
6.1
Open or Close the Measurements Logging Window
6.1.1 Open the Measurements Logging Window
Following two methods are available.
In the [Basic Controller] Menu Bar, select [Tool] - [Logging].
Click [Logging] icon (
4.2.2) on the [Basic Controller] Tool Bar.
6.1.2 Close the Measurements Logging Window
Click the
in the upper right corner of the [Logging] window.
6.2
Name of Each Component in the Window
a) Menu Bar
b) Tool Bar
c) Log display section
Figure 6-1 Measurements Logging Window
a) Menu Bar
b) Tool Bar
c)
Log display section
Advertising