GW Instek PPH-1503 - Manual (Page 112)

PPH-1503 User Manual
112
SAV8: User settings stored in memory
location 8.
SAV9: User settings stored in memory
location 9.
Example :SYSTem:POSetup SAV0
Set the power on configuration to SAV0.
Command
:SYSTem:POSetup?
Function Query the power on configuration.
Example :SYSTem:POSetup?
Returns the power on configuration.
Command
:SYSTem:COMMunicate:LAN:DHCP[:STATe] <b>
Function Sets the DHCP state on or off.
Description <b>
0/OFF: DHCP off
1/ON：DHCP on
Note: The :SYSTem:COMMunicate:LAN:APPLy
command must be executed before the DHCP
settings can take effect.
Example :SYSTem:COMMunicate:LAN:DHCP ON
Enable DHCP.
Command :SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Function Query the DHCP status.
Example :SYSTem:COMMunicate:LAN:DHCP?
Returns the DHCP state.