GW Instek PPH-1503 - Manual (Page 70)

PPH-1503 User Manual
70
F. Use the up and down arrows to select
Output Format.
G. Press the Enter key to toggle between
the different output formats.

H. Press the Menu key to exit and return
to the main menu.
Output Formats There are two different output formats to select
from: KEITHLEY 2303 and FLUKE PM2811.
Steps Follow steps A~E in the previous section, above.
F. Use the up and down arrow keys to
select Output Type.
G. Press the Enter key to toggle between
each of the output formats.

H. Press the Menu key to exit and return
to the main menu.
Setting the GPIB
Address Configuring the GPIB address for connection to a
PC.
Steps Follow steps A~E in the previous section, above.
F. Use the up and down arrow keys to
select Primary Address.
G. Press the Enter key and then set the
GPIB address. Press the Enter key again
to confirm. The address range is 1~30.
