GW Instek PPH-1503 - Manual (Page 47)

BASIC OPERATION
47
numberpad enter 33

.
The time range can be set between
33uS and 833333uS. The setting units
are in microseconds (uS).
TrigDelay Use the arrow keys to select
TrigDelay
,
press Enter and input the delay. Press
Enter again to confirm.
The TrigDelay has a settable range of
0~0.10000S. The setting units are in
seconds (S).
AverRead[3] Use the arrow keys to select
AverRead[3]
, and then press Enter. Input
the AverRead number and then press
Enter again to confirm.
The AverRead setting has a settable
range of 1~00.
TrigLeve[3] Use the arrow keys to select
TrigLeve[3]
and press Enter. Input the trigger
level and press Enter again to
confirm.
The TrigLeve parameter has a
settable range of 0~5.000A. The
setting units are in amperes (A).
RecallSetup Use the arrow keys to select
RecallSetup
and press Enter to go the Recall Setup
menu. Use the arrow keys to a setup.
Press the Enter key to confirm. See
page
60 for further details.