GW Instek GSP-827 User Manual - Manual (Page 22)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
21
6.2.18 Save measurement/setup to Memory
Function key Description
Save/Recall Select the Save/Recall relative functions.
F1 <Save
Trace>
Save the trace.
F5 <From
Live>
Select the measuring trace to save.
Up/Down
Arrows or
Spinner
Select the memory to save. The memory list is on the LCD
display.
Right Arrow Move the cursor to the Name filed of memory.
Up/Down
Arrows or
Spinner
Use Up/Down arrow keys to select the alphabet to name the
stored data. Repeat these four arrow keys to complete the
name. Or
Enter Press Enter to complete the operation.
Note: The Setup is saved simultaneously when the trace is saved.
6.2.19 Recall trace/setup to Memory
Function key Description
Save/Recall
Select the Save/Recall relative functions.
F2 <Recall
Trace>
Activate the trace/setup recall function.
Up/Down
Arrows
or
Spinner
Select the memory to recall. The memory list is on the LCD
display.
F5
<to Tr A>
Select trace A as recalling destination. Or
F5
<Setup>
Select recalling the Setup.
Enter Press Enter to complete the operation.
6.2.20 Turn ON/OFF the Internal calibration signal
Function key Description
System
Select the System functions.
F3
<RefSig >
Switch the internal calibration signal 100MHz -30dBm
ON/OFF.
6.2.21 Calendar/Clock setting
Date setting
Function key Description
System Select the System relative functions.
F5 <System
clock>
Select to set the real time clock inside.