GW Instek GSP-827 User Manual - Manual (Page 47)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
46
Activate Multi Marker Mode, MM Mode
Switch the Multi-Marker Mode ON by pushing MM Mode Off , the related functions are as
the following figure:
The steps for Multi-Marker Mode operation are as follows:
Normal mode:
Select Marker >> Turn ON marker >> Select Normal mode >> Enter the marker
frequency
Delta mode,
Select Marker
>> Turn ON marker >> Select Delta Mode >> Select the Reference
Marker >> Enter the Delta Frequency
The operation details of each function key is described as follows:
Multi Marker Mode Operation—Normal Mode
Marker Selection
Marker MM Mode
Off
Marker Marker
0
0
1 2 3
7
6 5 4
8 9
. -
GHz
dBm
MHz
dBmV
kHz
dBuV
BK SP
Marker
9
Start:99.5MHz
RBW:30 kHz
Stop:100.5MHz
VBW:100 kHz
Center:100.0MHz
Span:1.0MHz
Sweep:100.0ms
Ref Lvl: -30.0 dBm
-30.0
-40.0
-50.0
-60.0
-70.0
-80.0
-90.0
-110.0
-100.0
SAT JAN 28, 2003 14:30:25
INT:REF
AMPL CAL
Marker Level Freq(MHz)
Marker
9
Marker
ON OFF
Mkrs->
Peaks
Normal
∆Mkr
1
3
4
Return
1 -30.7 100.0
3 -31.5 100.1
4 -34.1 99.91
9 -65.1 100.3
9