GW Instek GSP-827 User Manual - Manual (Page 87)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
86
System
Config
Self Test
Self Test will tell the test results of GPIB, Flash memory, NVRAM and RTC (Real Time
Clock).
System Preset
Preset will reset the unit and go back to the default parameters rather than the last one.
System Configuration
Maintenance
Maintenance is to set the option configuration for manufacturer. It is intentionally not
allowed user to access. Refer to service manual for service demand.
System More
Self
Test
System More
System
Preset
System More
System
Config
1
System More
Mainte-
nance
Start:99.5MHz
RBW:30 kHz
Stop:100.5MHz
VBW:100 kHz
Center:100.0MHz
Span:1.0MHz
Sweep:100.0ms
Ref Lvl: -30.0 dBm
-30.0
-40.0
-50.0
-60.0
-70.0
-80.0
-90.0
-110.0
-100.0
SAT JAN 28, 2003 14:30:25
INT:REF
AMPL CAL
Self
Test
System
Preset
Mainte-
nance
Return
System Configuration
: <P4011>
: 01.00
: 03/15/03
: 2.0
: TG
: LO1 LOCKED
LO3 LOCKED
: INTERNAL, STD
: LOCKED
<Press any key to continue>
Serial Number
Software Version
Release Date
Firmware Version
Option
LO Lock Status
Reference Signal
Reference Status