HT instruments SIRIUS87 - Manual (Page 63)

SIRIUS 87
EN - 61
5.2. RECALL RESULT AT DISPLAY
If you want to recall the stored test results proceed as follows:
1.
Press the RCL/ESC key.
 If the memory of the instrument is not
empty it displays the screen alongside.
MEM

3
Pla 02
2. Use
the
U
L
▼, S▲ keys to select the memory location number to be
displayed.
3. Press
the DISP key to display the test result related to the selected
memory location. If a RCD AUTO mode was selected, press
DISP key
another time to scroll all the data stored.
4.
Use the U
L
▼, S▲ keys again if you want to display again the numbers of
memory locations.
Press
RCL/ESC key at any time to leave the memory menu and go back
to the measurement selected.
Number of the memory location in which the
measurement results were stored.
Value of the parameter PLA related to the
saved measurement
S▲
U
L
▼
RCL
ESC
DISP
RCL
ESC
S▲
U
L
▼