KANOMAX 6036 Multi-function thermal anemometer Software Manual - Manual (Page 11)

3. Data Acquisition Software (S603-60) 7
3.1.3 Windows 7
1)Please wait while “Installing device driver software” message is
being displayed in the lower right of the screen.
2)In a short time, “Device drive software was not
successfully installed” message will appear.
3)Click “Start” Æ “Control Panel” Æ “Hardware and Sound”.
4)Click “Device Manager”.
5)After opening the Device Manager window, confirm that
“KANOMAX Anemo Master Model 6036” is listed in
“Other Device” and right-click it.
Highlight and click on “Update Driver Software” in the menu.