KANOMAX 6036 Multi-function thermal anemometer Software Manual - Manual (Page 20)

4. PC-LINK Software (S603-01) 16
5.2 Data Acquisition
5.2.1 Acquiring Data from Anemomaster
Set the Anemomaster to the measurement mode where the data to be acquired is saved.
For example, if you want to download an air velocity data to your computer, set the Anemomaster to an air
velocity measurement mode.
Note: Ensure that you have stored measurements in your Anemomaster before running this program. (See
Anemomaster operation manual for instructions on storing measurements.)
1) Select the drive (a) and directory (b) where the acquired data will be saved.
2) Enter a file name for the data to be acquired. (c)
3) Click [Read Data] to begin acquiring data from Anemomaster. The saved acquired data will be listed in the
data list (e).
5.2.2 Viewing Data Saved on the Computer
1) Select the drive (a) and directory (b) where the data acquired from Anemomaster is stored.
2) Click the file name that you want to view from the saved file list (f).
3) The selected data will be displayed on the data list (e).
<Data Display Window>
Serial No. of the Connected
Instrument
(a)
(b)
(c)
(d)
(f)
(e)