KANOMAX 6036 Multi-function thermal anemometer Software Manual - Manual (Page 14)

3. Data Acquisition Software (S603-60) 10
4.2 Measurement
4.2.1 Starting a Measurement
1) Click [Measurement] -> [Measurement] from the menu bar.
(Or click the button from the tool bar or press F4 key.)
2) “Measuring Parameter Setting” dialog box will be displayed. Configure each setting for a measurement.
3) To start a measurement based on the selected measurement setting, click [Measurement] (a).
<Measuring Parameter Setting Dialog Box>
1 ~ 600 sec
(Sampling Time) 1～65500 times
(Number of Sampling)
Duct Shape
Sampling Method
0 ~ 2550 mm
0 ~ 255 inch
(Set width & height or diameter
for the duct to be used.)
(A)
Serial No. of the
Connected Instrument