KANOMAX 6036 Multi-function thermal anemometer Software Manual - Manual (Page 16)

3. Data Acquisition Software (S603-60) 12
4.2.3 Displaying Measurement Data
¾ Click the data mark line on the graph to indicate the corresponding data record in the data sheet.
¾ Click the data on the data sheet to move the data mark line to the corresponding position on the graph.
[Note]
This software does not have a function to redisplay any stored measurement data. Once data is saved,
the measurement data cannot be displayed in the above format.
4.2.4 Air Velocity Graph Setting
1) Click [View] -> [Wind Speed Graph Parameter Edit] from the menu bar.
(Or click button on the tool bar or press F6 key.)
2) “Graph Parameter Edit” window will be displayed.
3) Set the X axis (horizontal axis) that indicates time.(a) (unit: select one from sec, min, hour, day)
<Example of Measurement Data Display>
Data mark line
<Graph Parameter Edit Window>
(a)
(c)
(b)
X axis (horizontal axis)
(time setting range)
1-60 seconds
1-60 minutes
1-24 hours
1-30 days
Y axis (vertical axis)
(air velocity setting range)
1-30 m/s
100-6000 FPM