KANOMAX 6036 Multi-function thermal anemometer Software Manual - Manual (Page 8)

3. Data Acquisition Software (S603-60) 4
3. Installing Device Driver
3.1 Device Driver Installation
When installing the software, be sure to log in with the user having administrative rights and follow the
procedure below.
When you connect the ANEMOMASTER MODEL 6036, “Found New Hardware Wizard” window will be
displayed. Install the device driver following the procedure below. To install the device driver, be sure to insert the
product CD-ROM into the CD-ROM driver.
3.1.1 Windows XP
1) “Found New Hardware Wizard” window will be displayed.
Select “No, not this time”, and click [Next>]
2) Select “Install from a list or specific location (Advanced) ,
and click [Next>]
3) On the screen to choose your search and installation options,
select “Search for the best driver in these locations.”,
and check the box for “Search removable media
(floppy, CD-ROM…)”.
Then click [Next>] to start installation.