KEPCO BOP-HV - Manual (Page 19)

BOPHV112211
1-7
1.7 ACCESSORIES
A) MOUNTING FLANGES, for installation of the BOP into a standard (19-inch) equipment
rack (refer to Section 2, FIG. 2-5). (A pair included with each BOP). Kepco Part No. 128-
1282 (right), 128-1281 (left).
B) REAR PROGRAMMING CONNECTOR, Kepco Model PC-9, 30-terminal printed circuit
connector for all rear programming connections and flag signal outputs (One included with
each BOP).