KROHNE OPTISOUND 3000 Series EN - Manual (Page 19)

Reset
Reset
select?
In this menu item you select the internal calculating unit
of the sensor: m(d) or ft(d).
Units of measurement
m(d)
The sensor is already set to the ordered national
language. In this menu item you can change the
language. The following languages are available:
l
Deutsch
l
English
l
Français
l
Espanõl
l
Pycckuu.
Language
Deutsch
With this function
l
data are read from the sensor
l
data are written into the sensor.
The data are permanently saved in an EEPROM
memory in the indicating/adjustment module and remain
there even in case of voltage failure. From there, they
can be written in one or several sensors and kept as a
backup for a possible sensor exchange. When writing
the data into the sensor, the instrument type from which
the data originate as well as the TAG no. of that sensor
are displayed.
Units of measurement
Language
Copy sensor data
Indicating/adjustment module for OPTISOUND sensors 19
Set up
30603
-EN
-050401