KROHNE OPTISOUND 3000 Series EN - Manual (Page 20)

Sensor data
copy?
In this menu item, the PIN is activated/deactivated
permanently. Entering a 4-digit PIN protects the sensor
data against unauthorized access and unintentional
modifications. If the PIN is activated permanently, it can
be deactivated temporarily (i.e. for approx. 60 min.) in
any menu item. The instrument is delivered with the PIN
set to 0000.
PIN
Disable
permanently?
Only the following functions are permitted with activated
PIN:
l
Select menu items and show data
l
Read data from the sensor into the indicating/
adjustment module.
In this menu item the most important sensor information
can be displayed:
l
Instrument type, e.g. OPTISOUND 3010 C
l
Serial number: 8-digit number, e.g. 12345678
l
Date of manufacture: Date of the factory calibration,
e.g. 26. September 2004
l
Software version: Edition of the sensor software, e.g.
3.22.00
l
Date of last change using PC: Date of the last change
of sensor parameters via PC, e.g. 26. September
2004
l
Sensor details, e.g. approval, process fitting, seal,
meas. range, electronics, housing, cable entry, plug,
cable length etc.
PIN
Info
20 Indicating/adjustment module for OPTISOUND sensors
Set up
30603
-EN
-050401