KROHNE OPTISOUND 3000 Series EN User Manual
Page 22
l
Mass
l
Flow
l
Volume
l
Without unit.
Depending on the selection, the different units will be
available.
In the menu item "Scaling", the requested numerical
value with decimal point is entered for 0 % and 100 % of
the measured value.
There is the following relation between the indication
value in the menu "Display" and the adjustment unit in
the menu "Basic adjustment":
l
With ultrasonics, the indication value "Distance"
means: Presentation of the measured value in the
selected adjustment unit, e.g. m(d).
Displayed value
scaled
Indication
unit
Volume
l
Scaling
0 % = 0.0 l
100 % = 100.0 l
In the menu item "Current output" you determine the
behaviour of the current output during operation and in
case of failure. The following options are available:
Current output
22
Indicating/adjustment module for OPTISOUND sensors
Set up
30603
-EN
-050401