KROHNE OPTITEMP TT 50 C-R EN - Manual (Page 14)

3
INSTALLATION
14
OPTITEMP TT 50 C/R
www.krohne.com 09/2010 - 4000636502 - MA OPTITEMP TT 50 C/R R03 en
3.3 Rail-mount transmitter
The rail-mount transmitter is intended for installation on a rail according to DIN 50022.
1 Hook the upper groove of the transmitter onto the rail.
2 Press the lower part of the transmitter against the rail.
i When you hear a "click" from the snap fastener, the transmitter is fixed onto the rail
(drawing in the centre).
3 To remove the transmitter, use a small screwdriver to push the snap fastener downwards.
4 Carefully move the lower part of the transmitter in the forward direction and then upwards.
DANGER!
Never install or operate the TT 50 C in potentially explosive areas, it might cause an explosion
that can result in fatal injuries!
.book Page 14 Monday, September 13, 2010 5:07 PM