KROHNE OPTISENS PAM 2080 EN - Manual (Page 16)

www.krohne.com 16
INFORMATION!
The converter recognises all connected probes automatically. You can attach and pin-align the probes at
any port you choose, in any sequence you choose, even during operation. Data transmission between
measuring probes and converter takes place via an internal bus system.
The system's plugs and ports are coded for reverse polarity protection.
Connect the corresponding data cable plugs with the ports on the immersion holder and converter
PAM2080 / bus distribution box.
Always secure the connections by tightening the plug retaining ring.