KROHNE OPTISENS PAM 2080 EN - Manual (Page 18)

www.krohne.com 18
5.2 Switch On / Off
Switch on converter PAM2080 at the On / Off switch.
The converter runs a self-test for approx. 20 sec. The converter identifies all sensors connected
to the system in the process.
The auto-clean function launches in addition.
The display is inactive during the self-test.
After the self-test, the first channel with its parameters is automatically shown in the display.
NOTE!
The scroll function is active during initial start-up (factory settings). In the process, if several probes are
attached, the converter switches automatically to the next measuring channel every 6 seconds, and so on.