KROHNE OPTISENS MAC 080 EN - Manual (Page 12)

3
INSTALLATION
12
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
Installation
3.1 Notes on installation
3.2 Storage
• Store the device in a dry, dust-free location.
• Avoid continuous direct sunlight.
• Store the device in its original packing.
3.3 Configuration of a measuring point
A complete measuring point consists of at least three parts:
• MAC 080 converter
• OPTISENS 2000 sensor (including cable)
• MAA 2000 sensor holder
If automatic flushing is installed, an optional solenoid valve is necessary as well.
Examples of typical measuring points are listed in the following sections.
INFORMATION!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Check the packing list to check if you received completely all that you ordered.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
.book Page 12 Tuesday, January 19, 2010 1:07 PM