KROHNE OPTISENS MAC 080 EN - Manual (Page 14)

3
INSTALLATION
14
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
3.3.2 Two parameter measuring point
The figure above shows a two parameter measuring point consisting of one converter 1, two
sensors 4 with a telescopic rod immersion assembly as sensor holder 3 and one solenoid valve
2 for flushing.
Both sensors are flushed via one solenoid valve using an optional Y-splitter.
For connection of two sensors to the converter an optional junction box is needed.
1 Converter
2 Solenoid valve for flushing (to be ordered with converter)
3 Mounting assembly
4 Sensor incl. 10 m / 33 ft cable and flush hose
5 Junction box for connection of up to 4 sensors (to be ordered with converter)
6 Mounting post
7 Mounting plate with sun shield
.book Page 14 Tuesday, January 19, 2010 1:07 PM