KROHNE OPTISENS MAC 080 EN - Manual (Page 15)

INSTALLATION
3
15
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
3.3.3 Four parameter measuring point
The figure above shows a four parameter measuring point consisting of one converter 1, four
sensors 4 with a telescopic rod immersion assembly as sensor holder 3 and two solenoid
valves 2 for flushing.
Two sensors each are flushed via one solenoid valve using an optional Y-splitter.
For connection of four sensors to the converter an optional junction box is needed.
1 Converter
2 Solenoid valve for flushing (to be ordered with converter)
3 Mounting assembly
4 Sensor incl. 10 m / 33 ft cable and flush hose
5 Junction box for connection of up to 4 sensors (to be ordered with converter)
6 Mounting post
7 Mounting plate with sun shield
.book Page 15 Tuesday, January 19, 2010 1:07 PM