KROHNE IFC 100 Converter EN - Manual (Page 48)

6
OPERATION
48
IFC 100
www.krohne.com 07/2010 - 4000041004 - MA IFC 100 R04 en
6.1.3 Display when setting parameters, 4 lines
6.1.4 Display when changing parameters, 4 lines
Figure 6-4: Display when setting parameters, 4 lines
1 Current menu, sub-menu or function
2 Number relating to 1
3 Denotes factory setting
4 Denotes permissible value range
5 Permissible value range for numeric values
6 Currently set value, unit or function (when selected, appears with white text, blue background)
This is where the data is changed.
7 Current parameter (open with >)
8 Factory setting of parameter (non-alterable)
Figure 6-5: Display when changing parameters, 4 lines
1 Current menu, sub-menu or function
2 Number relating to 1
3 Denotes the change of a parameter (simple to check changed data when browsing through lists)
4 Next parameter
5 Currently set data from 6
6 Current parameter (for selection press key >; then see previous chapter)
7 Factory setting of parameter (non-alterable)
.book Page 48 Friday, July 9, 2010 12:29 PM