KROHNE H250 M8-M9-M10 EN - Manual (Page 18)

3
INSTALLATION
18
H250
www.krohne.com 04/2011 - 4000269302 MA H250-R02 en
3.3.2 Magnetic filters
The use of magnetic filters is recommended when the medium contains particles which can be
influenced magnetically. The magnetic filter is to be installed in the flow direction upstream of
the flowmeter. Bar magnets are positioned helically in the filter to provide optimal efficiency at
low pressure loss. All of the magnets are coated individually with PTFE to protect against
corrosion. Material: 1.4571
Magnetic filters
1 Type F - fitting part with flange - overall length 100 mm
2 Type FS - fitting part without flange - overall length 50 mm
MA_H250_R02_en_269302_PRT.book Page 18 Tuesday, April 12, 2011 10:17 AM