KROHNE H250 M8-M9-M10 EN - Manual (Page 49)

OPERATION
6
49
H250
www.krohne.com 04/2011 - 4000269302 MA H250-R02 en
6.5 Menu indicator M10
6.5.1 Factory settings
Menu Function Setting
1.1.1 Switching value B1 0.0
1.1.2 Hysteresis B1 0.0
1.2.1 Switching value B2 0.0
1.2.2 Hysteresis B2 0.0
1.3 Display Flow rate
1.4 Time constant 3 s
1.5.1 Reset counter NO
1.5.2 Reset error NO
3.1 Language DEUTSCH
3.2 Function B1 INACTIVE
3.3 Contact B1 NC contact
3.4 Function B2 INACTIVE
3.5 Contact B2 NC contact
3.6 Pulse duration 100ms
3.7 Pulse / unit 001 / liter
3.8 Function B3 INACTIVE
3.9 Multidrop polling address 0
3.12 Alarm current OFF
3.13.1 Flow unit see rating plate
3.13.2 Counter unit Derived from the flow unit
3.14 LFC 4% ON 6% OFF
3.15 Input code NO
INFORMATION!
The device has been set at the factory in accordance with the customer order.
Therefore subsequent configuration via the menu is only necessary if the intended use of the
device is changed.
MA_H250_R02_en_269302_PRT.book Page 49 Tuesday, April 12, 2011 10:17 AM