KROHNE H250 M8-M9-M10 EN - Manual (Page 20)

4
ELECTRICAL CONNECTIONS
20
H250
www.krohne.com 04/2011 - 4000269302 MA H250-R02 en
Electrical connections
4.1 Safety instructions
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
DANGER!
Observe the national regulations for electrical installations!
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the
electrical components of the measuring device may only be carried out by properly trained
specialists.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
MA_H250_R02_en_269302_PRT.book Page 20 Tuesday, April 12, 2011 10:17 AM