KROHNE OPTISONIC 7060 EN - Manual (Page 27)

OPTISONIC 7060
Electrical & mechanical installation manual 730962.31.00 page 27 of 52
3.4.4 Terminal box on the CONVERTER
Open the rear housing cover.
• Loosen the securing bracket using a 3 mm Allan key.
• Turn the rear housing cover in a counter-clockwise direction and take it off.
A schematic wiring diagram is provided on the inside of the rear housing cover (see also
Appendix, Section 8.3 ).
Fig. 3.6: CONVERTER housing, opening the cover
1. Housing cover
2. Securing bracket